Helle Utvær Knife Model 600 (Made In Norway)

The Utvær featurs a strong, full tang construction, ample curly birch handle and 4-inch blade of Sandvik 12C27 steel. The drop point Scandinavian ground blade, leather sheath, and curly birch wood handle characterize Helle’s renowned strength, functionality and beauty.

Maintenance

Helle knives are designed to retain their sharpness as a lifelong outdoors companion. But it is still important to take care of your knife and its sheath.

• The Handle. Dry the handle with a soft cloth if wet and wax occasionally.
• The Sheath. The leather needs to be impregnated occasionally with colourless impregnation agent (grease or wax) to keep supple. Dry the sheath carefully in room temperature if it becomes wet
• The Blade. Wipe the blade with a soft cloth if wet and treat with grease occasionally.

Sharpening
Use a diamond tool or a wet stone for sharpening. Place the knife bevel flat to the sharpening tool and work the entire blade. Work one side until you can feel a slight burr on the opposite side. Switch side and repeat the procedure until you feel the burr on the first side. You have now established an edge.

Remove the burr by stroking the blade gently over the sharpening surface on both sides, as if cutting very thin slices. Keep the bevel flat towards the sharpener and move from side to side until the burr is gone.

Specifications

• Name: Utvær
• Weight: 160 g
• Blade material: Sandvik 12C27 stainless steel
• Blade thickness: 3,0 mm
• Blade length: 100 mm
• Handle material: Curly birch and vulcan fibre
• Handle length: 110 mm
• Sheath material: Genuine leather
• Sheath weight: 50 g
• Design: Jesper Voxnaes
• Handmade in Norway
• Art. no: 600